Owners manual

9959 04/22/2016
Removal and Installation Procedure for Front Coilovers
(Shocks come pre-charged direct from the factory with 200 PSI of Nitrogen)
1. Park the vehicle on a level concrete surface where it is safe to work on your vehicle.
2. Loc
k and center the steering wheel.
3. P
lace blocks in front and behind the rear tires so as to keep the vehicle from movi
ng
f
orwards or backwards.
4. I
t is beneficial that you get a reference measurement of the stock ride height prior to the
removal of the stock coilovers; measuring the distance from the center of the hub to t
he
bot
tom of the fender does this. You will use this measurement when you are setting your
ride height after installation.
5. U
sing a jack lift the front of the vehicle and support the vehicle using jack stands. Be sur
e
t
o place the jack and jack stands securely in the positions shown in the diagram. After
placing the jack stands slowly lower the jack and remove the jack so that the front
suspension can hang freely. Remember to be alert and cautious when working under
a
v
ehicle.
6. Remove the front wheels and set them aside.
7. U
sing a 14mm wrench or socket remove the three nuts from the top of the OEM spri
ng
hat
.