Owners manual

9956-1 2010+ FJ Cruiser Front 04/16 (Rev B)
11. Using a 14mm wrench or socket remove the sway bar mount bolts (two for each mount)
and remove the sway bar mounts. Make sure to save the mount brackets and bushings
as well as the bolts since you will be reusing them with your new sway bar. To remove
the sway bar, swing the tie rod under the sway bar ends and than rotate the sway bar
ends towards the ground. Finally pull the sway bar out from one side.
12. Using a 14mm wrench or socket remove the three nuts from the top of the OEM spring
hat.
13. Using a 19mm wrench and 19mm socket or wrench remove the bolt (19mm) and nut
(19mm) from the lower shock mount. Remove the entire shock assembly from the truck.
Remember to save the lower shock mount bolt and nut.