User's Manual

Package Contents
1 x SnapTo Wireless Charger
1 x Wall Mount Kit
1 x USB-C to USB-A Cable
2 x SnapTo Tabs
1 x Quick start guide
Install the SnapTo tabs
Remove the plastic placeholder tabs from your Moshi case.
Peel the adhesive liner from the SnapTo metal tab.
Place the tab into your case and press firmly for 30 seconds.
Repeat for the 2nd tab.
How to charge wirelessly with SnapTo Wireless Charger
Plug the included USB-C to USB-A cable into the SnapTo Wireless Charger, the
n connect it to any USB Type-A wall charger (not included). A USB-C to USB-C
Cable and charger (such as Moshi’s Rewind C) also works.
Charging automatically begins after attaching your phone (installed in a Moshi S
napTo case) to the SnapTo Wireless Charger.
For optimal performance, use a high-output wall charger over 5 W (12 W recom
mended) for better charging efficiency.
How to install the wall mount kit
Make sure the mounting surface is clean and dry.
Peel off the adhesive liner from the wall mount kit.
Firmly press the wall mount kit onto the clean and dry mounting surface for 30 s
econds.
After 24 hours has passed, insert the SnapTo Wireless Charger into the wall mou
nt kit.
Plug the supplied USB-C to USB-A cable into SnapTo Wireless Charger, then co
nnect to any USB Type-A wall charger (not included). A USB-C to USB-C Cable
and charger also works.