Product Info

Manual 2K7959760A

Date: 07/23/2020 version 0.2 page1 of 3

1.1.1 Frequencies

Bluetooth Low Energy f=2402MHz ÷ 2480MHz

1.1.2 Function description

Image1 S-SG

The S-SG in the car seat is powered by a built-in battery. The mechanical construction enabling the

exchange of the battery without special tools or soldering. The S-SG sends the status information of

the belt buckles and the status of seat occupancy sensors. The information is sent either at the time

when a change is detected, or every 25 seconds cyclically. The reading period of the AD value of the

resistance circuit in the seat occupancy sensor is 200 ms, it can be changed by software. The battery

voltage is read once a day. The algorithm for the evaluation of the battery status then sends the

current value in every Bluetooth message. The S-SG is contacted only at the time of data

transmission with the F-SG, otherwise it is in the (low power mode) power saving mode.

PAGE 1
Manual 2K7959760A 1.1.1 Frequencies Bluetooth Low Energy f=2402MHz ÷ 2480MHz 1.1.2 Function description Image1 S-SG The S-SG in the car seat is powered by a built-in battery. The mechanical construction enabling the exchange of the battery without special tools or soldering. The S-SG sends the status information of the belt buckles and the status of seat occupancy sensors. The information is sent either at the time when a change is detected, or every 25 seconds cyclically.
PAGE 2
Manual 2K7959760A 1.1.3 Error conditions The device can not detect faulty state of belt buckle, the analog value is not measured at the entrance, there is only detected a logic signal. The device detects error state values at the inputs to determine the seat occupancy.
PAGE 3
Manual 2K7959760A 1.1.4 Temparature or voltage operating range temperature: voltage: -40C ÷ +80C battery 3,3V; CR2477 The manufacturer of this radio equipment declare that devicecomply with the ISED regulation: IC: 25953-WSBRS001 NOTICE: This device complies with Part 15 of the FCC Rules [and contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS standard(s)].