Technical data

Xtreme Pag. 17
Electronic Broadcast Equipment
PARAMETER SELECTABLE VALUES
Operate-ByPass OPERATE - BYPASS
Lenguage Select. ITALIANO - ENGLISH
Time & Date DAY MONTH YEAR HOURS MINUTES SECONDS
Contrast 0 ÷ 16
RS232 Selection XTREME - RDS
Default Preset ATTENTION. ONCE THIS CHOICE IS CONFIRMED, ONLY THE FACTORY
PRE-SET DATA ARE RE-SET
VERSION DISPLAY OF THE FOLLOWING PARAMETERS µP MSG DSP - SOFTWARE UPDATE
If you access the Update software option by mistake, by switching the machine off and on no change is carried out.
To perform Updating, see the appropriate description at the end of the manual.
Here some of the menus which can be seen.
Sec. 4-4-1 Setting date and time
To set a new date and time, press Jog and enter the “System” menu. Then select Time & Date, select the value to change
and, turning the Jog, set the new data. By pressing Jog again, the following position is reached.
At the end of the operation, return to Home menu.
Sec. 4-4-2 Adjusting the display contrast
In System menu, select the option Contrast, then select by means of the Jog a value between 0 and 16 (0 = min. contrast,
16 = max. contrast)