Technical data

Xtreme Pag. 13
Electronic Broadcast Equipment
At the end of the selection, return to Home menu by means of the “Back” option.
Sec. 4-1 Pre-enphasis
If you wish to use Xtreme II’s 2-channel output, you must disable the pre-enphasis, or in any event, use the transmitter’s
linear inputs.
This measure is essential in all cases, even if telephone lines are used up to the transmitter to transfer the signal.
To enable Xtreme II pre-enphasis on the Right and Left outputs, carry out the following set-up.
From Home menu press Jog and select Output Preset.