Technical data

Electronic Broadcast Equipment
Pag. 10 Xtreme
Sec. 1-4-4 RDS input (optional)
The RDS input is active in the FM version, if the RDS internal coder is not installed. It is provided with a BNC connector,
located on the rear panel, with 10 KΩ impedance.
Accepted levels range between 0 and -14dB.
Sec. 1-4-5 SCA input
A non-balanced BNC connector, for use with the SCA signal, is also available on the input. It can accept any type of
≥ 23 KHz subcarrier. The subcarrier is mixed with MPX signals. Accepted levels range between 0 and -14dB.
Sec. 1-4-6 RDS output (optional)
The RDS coder (optional) has an output on a non-balanced BNC connector, located on the rear panel. The output level is
fixed at 0dBu. It is also present on the MPX+RDS output with a level which can be adjusted from - infinite to -17.5dB.