User manual

26
Calls management
This section of the manual explains the basic functionality of the System.
It is assumed that the system is correctly installed.
How to make a call
Once the System is on, the main user interface will display the “HOME PAGE”.
A call can be made in three different ways:
¾ Direct Call
– inserting the number/address to call, see § “Direct call”.
¾ Recall
– reselecting an already called/incoming number, see § “Recall”.
¾ From the Phonebook
– see § “How to make a call from Phonebook”.
Direct call
To place a Direct Call:
1. From the
HOME PAGE, select Make your call in the BUTTON AREA
2. You will enter the DIRECT CALL page for address/number input.
3. Press the CALL key or the devoted Function key on the remote control.
!
A virtual keypad can be activated if you need to enter text (e.g. aliases for calls).
1. To activate it, simply press OK with the cursor in the input area.
2. Select the desired letter by moving the cursor over it, and pressing OK.
Call options
In the DIRECT CALL page, in addition to user number/address to call, is possible to set
some communication parameters:
• B
ASIC OPTIONS – Call profiles.
• ADVANCED OPTIONS – Call profiles, Rate, Call type.
> in Call type is possible to select “Audio-Video”
or “Audio” only calls.