User manual

76
Load default settings
From the HOME PAGE select:
SETTINGS / INSTALLATION
From here, the default System configuration can be reloaded. There are two options:
• User settings only .
• Factory Defaults.
Once selected the desired option from the dropdown menu, move to the LOAD
DEFAULT VALUES icon and press OK. Read all instructions carefully.
If the FACTORY SETTINGS option has been chosen, users will be asked, as a
precaution, for confirmation. An affirmative answer will result in the factory settings
being reloaded. All user settings and data will be lost, including call history,
phonebook numbers and static IP addresses.
Licenses
From the HOME PAGE select:
SETTINGS / INSTALLATION / LICENSES
This page is dedicated to supplementary functions not offered by default. In order to
obtain information on the activation of these functions, please contact your system
supplier.
To insert a licence key by means of the remote control:
1. Enter the licence key.
2. Press the
Enable Licence icon.
Available options, under licence:
a. Up to 4Mbps IP connections
b. Up to 768Kbps ISDN connections
c. PRI connections
d. NIC (X.21, V.35, RS.449, RS.530, RS.366) connections
e. G.703 connections
f. MCU
g. Dual Video