User manual

71
Access configuration – ISDN PRI Euro
This interface can be used by means of the “XLNA” external module
(see “X LINE NETWORK ADAPTER” §).
A) Move to the desired access configuration (icon 1) and press OK.
In this page you can:
 Choose to Enable Accesses.
 Specify the Number to be associated with the Primary Rate Interface.
 Specify the Subaddress , if present.
 Choose to enable the Multinumber function by checking the appropriate box.
B) Move to the Advanced icon, and press OK.
In this page you can:
 Choose Enable CRC4 depending on the connected network.
 B-channel selection (Time slot)
• Choose Terminal to select the channel in use for a call or let Network to choose.
• For request from Terminal:
> Choose
Channel interval to be used for a connection. You can select an interval by
defining First and Last channel.
> Channel search from starting from First or Last defined B channels.
Note: It is appropriate here to stress that unless you have special needs, it is advisable to
leave the “network” option selected, since incorrect configuration could create connection
problems. For special configurations, please contact your service provider.