User manual

40
Remote control
 Numeric only remote control:
Enable\Disable alphabetical digits only on the remote control.

ID code (1-99):
In order to control more systems with only one remote control, you can assign to each system a
numeric code (01 to 99), and then consequently set the remote control.
A) To configure the system:
1. Select the code box.
2. Enter the code.
3. Select (with arrows on remote control) the icon.
4. The system will ask for confirmation.
5. If confirmed, a window will appear and ask you to configure the remote control with
the new code.
6. Configure the remote control and press OK.
B) To configure the remote control:
1. Press the RED and GREEN keys at the same time.
2. Wait for Stand by key stopping blinking.
3. Insert the numeric code (01 to 99)
Note:
codes from 1 to 9 must be composed of two digits (e.g. 03).