User manual

Audio-video calls

From the HOME PAGE, select the VIDEO icon. The same function can be achieved by

pressing the CALL key on the remote control.

You will enter the following page:

To complete the video call, please follow these steps:

1. Select the call type from the dropdown menu (ISDN, IP-H323, IP-SIP, NIC, MCU, MCU ISDN,

MCU IP).

2. ISDN only: check or uncheck the

56K box for multiple rates of 56Kbps or 64Kbps.

3. Select the call rate from the drop-down menu.

To select an option from a drop-down menu, it is necessary to go to the menu

itself, press OK, select the desired option by means of the remote control arrows

and press OK.

4. Enter the number or user alias (the H.323 Name from the “H.323 Settings” menu) you want to call

using either the alphanumeric keys on the remote control or the virtual keypad.

1. A virtual keypad can be activated for situations where you need to enter text

(e.g. names for the phonebook or aliases for calls).

2. To activate it, set the remote control cursor in the box where you want to

enter text and press OK.

3. Select the desired letter by moving the cursor over it, and pressing OK.

4. To close the virtual keypad, select the ESC key and press OK

5. Move to the CALL icon and press OK to make the call. The same function can be achieved by

pressing the CALL key on the remote control.

6. To end the call, use the DISCONNECT remote control key; if configured, the system will ask you

to confirm disconnection.