Installation manual

73
Remote management
The System incorporates an integrated network server that allows management of the unit from a
remote PC. Through this interface it is possible to:
• Execute diagnostic tests.
• Check a system.
• Change System settings.
Access to the web page
Start a web browser on your PC. Enter the System’s IP address in the address bar of the browser.
A request to enter the network password will be displayed. Always enter “Aethra” in the User
Name field. The password can be changed from the default of “1234” in the system configuration
menu.
1. Home Page
2. SETTINGS
3. INSTALLATION
4. NETWORK INTERFACES
5. IP
6. SERVICES
7. Web – Telnet Management
Note:
The default Password is 1234.
For correct web page viewing in Windows Server 2003 you will need to activate script execution in
Internet Explorer by selecting:
Tools / Internet Options / Security / Custom level / Scripting / Active scripting / Enable.
A page very similar to the System user interface Home page will be displayed. From here, you can
make a call in the way previously described. The arrangement of the menus for configuration and
diagnostics is also the same.
In addition to the normal menus, a TOOLS section has been added where the following downloads
are available:
• The program DataConf.exe enables you to use NetMeeting 3.xx with ISDN, IP, or NIC calls
for multimedia activities (data channels T.120). See section “Managing the Data Conference
Software”.
• The program AePPTManager.exe enables you to load a PowerPoint presentation in the
system.
• The file NoteB.dat enables you to save all the phonebook data(MCU excluded), and can also
be used to transfer the data between systems.
• The file NoteBm.dat enables you to save all the phonebook data, and can also be used to
transfer the data between systems.
• Finally, a module is present that enables you to update the System phonebook data, using
files that are compatible with Aethra’s proprietary phonebook format.
From the Home Page, click on TOOLS to access these options.
The language of the web interface can be toggled between English and Italian by clicking on the
flag displayed at the top centre of the Home Page.
When using the web-based management features, use the
icon present on all pages to save
changes.