Installation manual

58
Presentations
During a call, the system allows to send slides or still images in Jpeg format that have been
previously loaded on the system using a PC.
• To load files onto the system, a PC with the AePPtManager program installed must be used.
The program can be downloaded by entering the System WEB interface and selecting the
“TOOLS” icon.
1. Download the AePPTManager.exe software
2. Start AePPTManager.exe
3. For a correct operation, files must be extract to a PC folder.
4. The self-extracting file includes AePPTManager.exe and AePPTManager.ini.
• Executing the program will display the following:
1. The program requests you to enter the system’s IP address and to choose the presentation
to transfer.
2. By pressing the SLIDE key on the remote control, you will enter the presentation
manager page.
3. Selecting the “DISPLAY PRESENTATIONS” icon and pressing OK will cause the first
nine slides of the presentation being displayed on video.
4. You can select a slide by moving the remote control arrows and pressing OK. The slide
will be locally displayed at full-screen and sent to the remote system.
5. The presentation can be managed using the remote control arrows or using the icons that
appear in the lower area of the screen.
Go back to previous slide.
Go to next slide.
Show slide sequence.
To leave the presentation, press the HOME key on the remote control.