Installation manual

52
H323 Settings
This section contains the configuration options necessary to use the system with the H.323 protocol:
• Name H.323: H.323 ID (the name used by the terminal for registration with the
gatekeeper)
• Number H.323: E.164 identifying number used by the terminal for registration with the
gatekeeper
• Gatekeeper use and address
Gatekeeper automatic IP address
Gatekeeper static IP address
Advanced
: Automatic registration to Gatekeeper: allows the user to change
registration timings
• Using NetMeeting: If a T.120 connection is available, a data conference using
NetMeeting can be started by entering the IP address of the application host server. To
enable this function:
1. Check the box next to “Use NetMeeting”
2. Enter a server IP address where the application is hosted.
!
For configuration information, please contact your network administrator.
SIP Settings
This section contains the configuration options for use of the system with the SIP protocol:
• Terminal name
• Terminal Password
• SIP Registrar Server
“Use registrar”: run terminal registration at a SIP Registrar Server
“Name”: Enter SIP Registrar Server name
(Ex: SipRegistrarServer.Domain.xxx)
“IP Address”
“Duration”: Registration duration (in seconds).
“Port”: Port for server signalling. (Default is 5060).
• Sip Proxy Server
“Use Proxy”: use a Sip Proxy Server
“Name”: Enter Sip Proxy Server name (ex: SipProxyServer.Domain.xxx)
“Domain”: Enter Sip Proxy Server domain
“IP Address”
“Port”: Port for server signalling (Default is 5060).
!
For configuration information, please contact your network administrator.