Installation manual

47
Access configuration (ISDN PRI National)
Select PRI in the “Access” box.
Move to the desired access configuration icon and press OK.
At this stage you can:
• Choose to enable Primary Rate Interface.
• Specify the number to be associated with the Primary Rate Interface.
• Specify the SPID, if present.
Move to the “Advanced” icon and press OK.
In this menu you can:
• Select B channel (Time slot)
- Request by the terminal or by the network
- Define usable B channels (per service provider instructions).
- Available channels search in increasing/decreasing order on defined B channels.
• Select cable length
From the drop-down menu, you can also select “Cable Length”: the length of the cable
connecting the System to the Primary Rate access socket used.
Note
It is appropriate here to stress that unless you have special needs, it is advisable to leave the “network” option
selected, since incorrect configuration could create connection problems. For special configurations, contact your
service provider.