Installation manual

46
Access Configuration (ISDN BRI Euro)
Move to the Configure Access icon and press OK.
From this menu, you can:
• Choose to enable one or more accesses.
• Specify the number to be associated with the access.
• Specify the subaddress, if present.
• Choose to enable the “MULTINUMBER” function by checking the appropriate box.
• Select TEI (either Automatic or Fixed)
The TEI is an identifying number that allows the ISDN exchange to distinguish between
different terminals connected to a common access point. If TEI Fixed is selected, then you
must manually enter the TEI number. Conversely, by not selecting it, the parameter will be
set as TEI Automatic. In this case, the TEI number will be automatically assigned by the
exchange and no further operations in this menu are necessary.
Note
Normally, the TEI is left as AUTO because an incorrect setting could create connection problems
Access configuration (ISDN BRI National)
Move to the Configure Access icon and press OK.
From this menu you can:
• Choose to enable one or more accesses.
• Specify the number to be associated with the access.
• Specify the SPID, if present.
• Select TEI, either Automatic or Fixed.
• Enable any eventual SPID2 and enter the appropriate numbers.
Access configuration (ISDN PRI Euro)
Select PRI in the “Access” box.
Move to the desired access configuration icon and press OK.
At this stage you can:
• Choose to enable Primary Rate Interface.
• Specify the number to be associated with the Primary Rate Interface.
• Specify the subaddress, if present.
• Choose to enable the “MULTINUMBER” function by checking the appropriate box.
Move to the “Advanced” icon, and press OK.
In this page you can:
• Choose to enable/disable CRC4 depending on the connected network.
• Select B channel (Time slot)
Request by the terminal or by the network
Define usable B channels (as for network provider instructions).
Available channels search in increasing/decreasing order on defined B channels.
Note
It is appropriate here to stress that unless you have special needs, it is advisable to leave the “network” option
selected, since incorrect configuration could create connection problems. For special configurations, please
contact your service provider.