Installation manual

44
Terminal Settings
From the Home Page select:
1. SETTINGS
2. INSTALLATION
3. TERMINAL SETTINGS
In this section you can configure terminal settings for various network interfaces. For each interface
it is possible to set, if present:
• The maximum data “Rate” for a call (excluding NIC).
• Audio coding
Enable/disable G.722.1 and MP4 AAC-LD coding
• Video coding
Enable/disable H.264 coding
• Channels
Determine if channels are to be bonded or not (ISDN only)
Note
With audio and video encoder/decoder settings set to <Auto> the system choose the encoder/decoder based on
the connection bit rate.
DualVideo H.239 and DuoVideo
TM
can also be enabled/disabled.
Network interface
From the Home Page select:
1. SETTINGS
2. INSTALLATION
3. NETWORK INTERFACE
In this section you can choose and configure the system’s network interfaces. For each interface, it
is possible to set some parameters.