Installation manual

35
Available resolutions are:
XGA resolutions
1024x768
800x600
640x480
PiP-PaP
In this page is possible to select “Multi Imagine” system functionalities:
• PiP: Picture in Picture
Allows to see two overlapped images in one monitor, that is remote image in full-screen
format, an local image in a smaller overlapped window; by means of remote control “Self”
key you can switch windows content.
Is possible to choose:
• PiP position (one of four monitor corners)
• PiP movements (clockwise or counterclockwise) by means of remote control
“PiP” key
• PaP: Picture and Picture
Allows to see in one monitor two windows side by side, with local and remote images; by
means of remote control “Self” key you can switch windows content.
• Multi Imagine Type
a. By selecting AUTO a mixed PiP and PaP function is enabled.
By means of remote control “PiP” key you can switch between PiP
and PaP.
b. By selecting PiP PiP function is enabled.
c. By selecting PaP PaP function is enabled.
!
Multi image type must be enabled separately for TV1, TV2 and XGA monitor.
• Multi Imagine Mode
a. By selecting AUTO PiP and PaP functions are enabled only when needed, that is
when number of video flows is greater than available monitors number, and
automatically place video flows (with precedence to remote ones).
b. By selecting ON PiP and PaP functions are enabled if at least two video flows are
available (in case of unique video flow you have a full screen image, eg when system
is not connected)
c. By selecting OFF PiP and PaP functions are disabled.
!
Multi image type must be enabled separately for TV1, TV2 and XGA monitor.
• Multi Imagine: remote control “Self” key and monitor info.
Remote control “Self” key allows to show video flows in different available monitors,
choosing among different combinations.
In the lower right corner of monitor containing GUI, an icon appears with four white
monitors showing available configurations, active configuration being in red.
The icon is hidden when default configuration is active.