Installation manual

25
Enter data in the phonebook by using the remote control alphanumeric keys or the virtual keypad to
fill out the available fields.
 Choose the call configuration to record the connection details for this user (Interface
used (ISDN, IP, SIP) and transfer rate)
 Enter NAME and COMPANY
 Enter the prefix and number
 Using the arrows move to the SAVE icon to save the new data or to CANCEL to exit
and press OK
Note
If you want to store an audio call only entry, you must check the Speech box.
Modifying and Erasing Phonebook Entries
To modify a phonebook entry:
1) Select the desired entry and press OK
2) Move to the MODIFY icon and press OK again
3) Enter modifications and save them
To erase an entry in the phonebook:
1) Select the desired entry and press OK.
2) Move to the CANCEL icon and press OK (the system will ask you to confirm deletion).
Connecting to a global Remote Phonebook
Phone book on a remote server (LDAP H.350 protocol).
To connect to the remote server, move to the drop down menu and select the desired server IP
address. The phonebook will now operate as described above.
Note
To correctly configure remote server connection parameters, please contact your network administrator.
Video Input Management
It is possible to manage different video inputs by selecting them using the remote control keys
“Camera”. The function keys “Red”-“Yellow”-“Camera”, can be configured to be associated with
any available video input.
Possible choices include:
 Room camera
 XGA Video input
 A camera connected to a supplementary video input
 VCR video
Note:
The desired video source must be connected to the System inputs on the back of the equipment beforehand.
For a correct setup of the function keys, see the chapter “Audio-Video-Data”, section “Camera”.
During a connection it is also possible to control not only the local video camera’s zoom and
panning functions but also those of the remote camera (if enabled). Use the remote control key
“Far/Near” to select remote or local camera.