Installation manual

21
To make a call:
1. Use “Search” field for an alpha-numeric search
2. Select the name, press OK to confirm
3. Move down to the chosen name and press OK to confirm.
4. Move to the CALL icon and press OK to make the call. The same function can be achieved
by pressing the CALL remote control key.
5. In order to end the call, use the DISCONNECT remote control key. The system will ask you
to confirm disconnection.
Audio-video calls
From the Home Page, select the VIDEO icon. The same function can be achieved by pressing the
CALL key on the remote control.
You will enter the following page:
To complete the video call, follow these steps:
1. Select the call type from the dropdown menu (ISDN, IP, SIP, NIC, MCU, MCU ISDN,
MCU IP).
2. ISDN only: check or uncheck the “56K” box for multiple rates of 56Kbps or 64Kbps.
3. Select the call rate from the drop-down menu .
!
To select an option from a drop-down menu, it is necessary to go to the menu itself, press OK, select the
desired option by means of the remote control arrows and press OK.
4. Enter the number or user alias (the H.323 Name from the “H.323 Settings” menu) you want
to call using either the alphanumeric keys on the remote control or the virtual keypad.
!
1. A virtual keypad can be activated for situations where you need to enter text (e.g. names for the
phonebook or aliases for calls).
2. To activate it, set the remote control cursor in the box where you want to enter text and press OK.
3. Select the desired letter by moving the cursor over it, and pressing OK.
4. To close the virtual keypad, select the ESC key and press OK
5. Move to the CALL icon and press OK to make the call. The same function can be
achieved by pressing the “CALL “ key on the remote control.
6. To end the call, use the DISCONNECT remote control key; if configured, the system
will ask you to confirm disconnection.