Installation guide

FS4104-AW – Installation Guide
23 / 31
Now enter the new administrator or user
password and click “Send”. A message
confirms that the operation was
successful.
How to change the IP address
After you set the configuration parameters and before you connect FS4104-AW to an existing
LAN, check that the default IP address (10.0.0.1) is compatible with the addresses used in the
LAN.
You can change the address with WEB server or StarManager (see § LAN and DHCP server
configuration).
Changing the IP address from WEB
Enter IP address and net mask in the LAN
0
page;
confirm with “Send” and save.