Installation guide

FS4104-AW – Installation Guide
20 / 31
Internal WEB server configuration with “Quick Start”
By using the DHCP services for the automatic configuration of network parameters in the LAN
PC’s, you can open the browser and enter the local IP address assigned to (10.0.0.1 by default).
The initial page refers to authentication (login). The password field is empty by default. Enter the
user name
9
(maximum 10 characters) and confirm.
Open the WEB Browser;
enter the address 10.0.0.1 or simply
“ATOS“;
enter User Name and Password (leave the
password field empty if you did not change
the password).
After login, select the language in the
vertical frame on the left;
select “Quick Start” to start the guided
procedure and enter ISP parameters.
9
You must enter at least one alphanumeric value in the user name field. For example, use the operator’s last name for
easier logon identification.