Installation guide

FS4104-AW – Installation Guide
14 / 31
Operating connections
Local network
You can connect up to 4 PC’s or other devices with Ethernet 10/100BaseT interface to the Ethernet
RJ-45 ports with braid cables ending with RJ–45 connectors. An external device (hub or switch) is
needed to connect other PC to FS4104-AW.
The following example illustrates how to connect RJ45 connectors to CAT5 cables for LAN.
Follow the color sequence to obtain correct signal screening and avoid connection
errors. Connectors are seen from the front (wires on the back).
8 – brown
7 – white brown
6 – green
5 – white blue
4 – blue
3 – white green
2 – orange
1 – white orange
Wires 1-2 must belong to the same braid; wires 3-6 must belong to a different braid.
HUB
(not included)