Installation guide

FS4104-AW – Installation Guide
12 / 31
Front panel
LINE 1 2
3
4
LINE
INTERNET
PWR
LAN
1 2 3 4
FS
4104-
A
W
WIRELESS
FS4104-AW
The front panel houses 7 LED’s that provide information on operation mode:
LED status
LED
function
LED
color
OFF ON FLASHING
LINE
GREEN
Correct connection with public
exchange modem.
During establishment of
physical level
GREEN
IP connected (the device has
a WAN IP address from
IPCP or DHCP and DSL is
up) and no traffic detected.
2
IP connected and IP traffic
is passing thru the device
(either direction)
INTERNET
RED
Device in Bridged mode or
no xDSL connection
Device attempted to become
IP connected and failed
3
WIRELESS
GREEN
WIRELESS interface not
active
WLAN features activated
WLAN activity present
(traffic in either direction)
LAN
1, 2, 3, 4
GREEN
No device connected to the
associated port
Powered device connected
to the associated port
LAN activity present (traffic
in either direction).
GREEN
Power supply.
(Successful initialization)
Initialization.
PWR
RED
No power supply
Power supply.
(malfunctioning)
2
If the IP or PPPoE session is dropped, the light will remain green if an ADSL connection is still present. The light will
turn red when it attempts to reconnect and DHCP or PPPoE and fails
3
No DHCP response, no PPPoE response, PPPoE authentication failed, no IP address from IPCP, etc.