Aetheros_Honeywell ASSEMBLY SOP 2020.06.
Antenna cable Antenna WiFi 2.4G_ NO.5 Antenna WiSUN _ No.1 Antenna LTE Main _ No.
Antenna location overview WiFi 2.
Antenna assembly-1 1. Stick WiFi antenna onto meter top cover and put cable into second hole (yellow circle). Cable routing: follow yellow circle.
Antenna assembly-2 1. Stick WiSUN antenna onto meter top cover and put cable into first hole (yellow circle). Cable routing: follow yellow circle.
Antenna assembly-3 1. LTE Main antenna stick onto meter top cover and put cable into hole (yellow circle) Cable routing: follow yellow circle.
Antenna cable location and holder assembly 1. Do the cable routing to keep antenna cables around inside surface of meter top cover. 2. Clip the holder module into meter holder. Hook: Red arrow Anchor point: Blue arrow Note: Pls make sure cables are not pinched by holder. LTE Main WiFi 2.
Antenna cable routing and assembly-1 1. The LTE Main (No.3) cable routing (red arrow) and assemble cable (green circle). Press IPEX connector on MB in place_No.3 (blue circle) as below. 2. The WiFi 2.4G (No.5) cable routing (red arrow) and assemble cable (green circle). Press IPEX connector on MB in place_No.5 (blue circle) as below.
Antenna cable routing and assembly-2 1. The WiSun (No.1) cable routing (red arrow) and assemble cable (green circle). Press IPEX connector on MB in place_No.1 (blue circle) as below.
Finished 10
