User manual

55 000 033 – Ed. D SCOOP STUDIO - User manual 1
This document is the property of AETA AUDIO SYSTEMS and can not be duplicated without authorisation March 2006
1. SCOOP STUDIO – Easy quick Start
1. Plug ISDN or POTS line to the appropriate socket on rear of unit
2. Plug in audio connections.
3. Power on the Scoop Studio via switch On/Off on rear panel of unit.
4. Select the appropriate network via the network menu
5.
- To use direct dial “Number” mode , enter a number
- To dial one of 5 last numbers press
“green phone” key once.
- To use a profile number, enter a letter
For 2 last modes, select the profile number via keypad ( left and right key )
6. Press
“green phone” key again for dialling.
7. If busy or bad connection Press
"red phone" then press the “green phone”
key twice to redial the last number dialled.
8. Connection status will be displayed in LCD screen once connected.