User manual

24 SCOOP STUDIO - User manual 55 000 033 – Ed. D
This document is the property of AETA AUDIO SYSTEMS and can not be duplicated without authorisation March 2006
8. Connecting 2 SCOOP STUDIO.
Note: The following is valid for both POTS and ISDN mode.
Warning: In ISDN mode with some PBX’s, you must enter your local number and
your SPID number prior making a call.
8.1. Initiating a call
There are 3 ways to initiate a call :
 Dialing with a profile
 Direct Dialing
 Re-dialing the previous number.
8.1.1. Dialling Using a Profile Number
From the Main Function Menu, select “DIRECTORY” symbol, and press
the key under it. After having selected “REMOTE” choice, press the key
under “Load”.
Note : You arrive directly in the remote profile list, when you enter a letter
under the main menu.
Select the profile number and press “Green phone” key.
"Call XXXXXXXX" appears on the screen and is dialed automatically.
8.1.2. Direct Dialling
Enter the telephone number and press the “green phone“ key. If you call
two numbers ( In ISDN ), you need to press again the same key.