User manual

36 SCOOP E-Z - User Manual 55 000 026 – Ed. B
This document is the property of AETA and can not be duplicated without authorisation November 2001
To test your POTS line, you may connect a normal phone to the wall connector instead
of the Scoop E-Z unit and call a normal phone number. Check for proper POTS line
settings: Dialing method, " Pulse/Tone", dial tone "Detect/Undetected". Check proper
setting if going through a PBX ( you may need to dial to get an outside line, Ex 9* ).
If the Scoop E-Z disconnects while on-line, check for loose connections between the
Scoop E-Z and the telephone connection. Line noise or interference may be interfering
with the modem signals. Retry the connection by dialing the number again.