User manual

34 SCOOP E-Z - User Manual 55 000 026 – Ed. B
This document is the property of AETA and can not be duplicated without authorisation November 2001
9.4.1. Secured modes
Three protection modes are available :
Protected 0 ( Unprotected ) is set by default ( Factory Configuration )
? Is compatible with all Scoop E-Z units.
? Keep the smallest transmission delay ( coding : decoding ) of 80 ms.
Protected 1
Ought to be selected manually and recovers errors of 100 ms.
Protected 2
Ought to be selected manually and recovers errors of 250 ms.
Note : If errors still exist in protected mode 2, set the max line speed at the next lower
speed.
Caution : The same protection level configuration must be
selected at the both end units.