User manual

55 000 026 – Ed. B SCOOP E-Z - User Manual 29
This document is the property of AETA and can not be duplicated without authorisation November 2001
8.2. Disconnecting a call
To end a call press the "red phone" key.
"Wait..." is displayed, after awhile, the Scoop E-Z is reset and ready for the next call.
The main menu appears on the screen.
8.3. Auto Answering
As soon as the "Power On Initialization" phase is completed, the Scoop E-Z is ready to
receive an ISDN call or a POTS call. You have just to adjust the levels in such a way
that the audio level green and yellow LED's indicate a normal operating range.
When a call is received the Scoop E-Z will recognize ISDN or POTS and establish a
connection. Adjust your headphone level and your local feed back with the local/return
mix balance if needed.
Then the Scoop E-Z is ready for full duplex audio communication.
8.4. Entering local Numbers
From the Main Function Menu, go to “SETUP”, “NET”,”PARAM”. Using the down
arrow key scroll right to "Address" screen. Press the center key to enter in address
configuration
You have two address configuration with each sub-address. You have a specific address
and sub-address for each B ISDN channel.
A series of AT commands will be displayed and automatically return you to the main
menu
Note : In many case, the subaddress is not necessary.