User manual

55 000 026 – Ed. B SCOOP E-Z - User Manual 27
This document is the property of AETA and can not be duplicated without authorisation November 2001
8. Connecting 2 SCOOP E-Z.
Note: The following is valid for both POTS and ISDN mode.
Warning: In ISDN mode with some PBX’s, you must enter your local number and
your SPID number prior making a call.
8.1. Initiating a call
There are 3 ways to initiate a call :
? Dialing with a profile
? Direct Dialing
? Re-dialing the previous number.
8.1.1. Dialling Using a Profile Number
From the Main Function Menu, select “DIRECTORY” symbol, and press
the key under it. After having selected “REMOTE” choice, press the key
under “Load”.
Note : You arrive directly in the remote profile list, when you enter a
letter under the main menu.
Select the profile number and press “Green phone” key.
"Call XXXXXXXX" appears on the screen and is dialed automatically.
8.1.2. Direct Dialling
Enter the telephone number and press the “green phone“ key. If you call
two numbers ( In ISDN ), you need to press again the same key.