User manual

55 000 026 – Ed. B SCOOP E-Z - User Manual 7
This document is the property of AETA and can not be duplicated without authorisation November 2001
4.2. Rear view
1 – V24 serial remote control
2 – POTS RJ11 Jack
3 – ISDN RJ45 Jack
4 – External DC Jack
Figure 2 – Rear panel
4.3. Scoop E-Z status
There are 23 LED’s on the front panel providing the following information :
- Info ( 2 yellow LED’s ) : Information ( Future use ).
- Alarm (red) : When “on”, indicates a network problem.
- Dec (green) : When "on" indicates that a successful connection exists and the
Scoop E-Z is decoding the POTS or ISDN signal.
- DC (green) : When “on”, Scoop E-Z use an external DC source.
- Battery (green / red) : When green “on” indicates that the battery level is
higher than 20%. When the battery LED changes to red, the remaining
autonomy of the Scoop E-Z is 15 minutes.