User manual

30 MIXY - User Manual 55 000 057 - B
4.7. Digital outputs and direct analog outputs
A common socket groups the two-channel digital audio output and three direct
analog outputs (direct channel signals, pre-fader).
The pin assignment of this 6-pin Hirose HR10-7R-6S is the following:
The differential signal on pins 2 and 3 has an AES format (110 : impedance) and
following characteristics:
Standard AES3 (Professional)
Format Balanced, transformer isolated
Amplitude (on 110 : load)
4 V p-p
Source impedance
110 :
An optional adaptation cable provides the AES signal on a 3-pin male XLR plug.
As an alternate option, an SPDIF adaptation cable is available; it provides the signal
on an RCA plug with following characteristics:
Standard CEI 958 , SPDIF, "consumer" format
Electrical format Unbalanced, transformer isolated
Connector Male RCA plug
Amplitude (on 75 : load)
0.5V c-c
Source impedance
75 :
Pin Function
1 Direct output of channel 1, pre-fader
2 + AES digital output
3 - AES digital output
4 Direct output of channel 2, pre-fader
5 Analog signal ground
6 Direct output of channel 3, pre-fader