User manual

24 MIXY - User Manual 55 000 057 - B
3.13.3. Case 3: M/S recording using M/S microphones
In this case, M/S stereo microphone couples are used, and the output is kept in M/S
format for recording. In this way, further stereo image processing is made possible
with studio equipment in later production.
The mixer buses process M (Mid) and S (Side) signals. L/RlM/S matrixing is not
applied at the MAIN output (Outputs kept configured in “L/R” mode). Monitoring
is here set in “M/S” mode, as matrixing is needed for monitoring a normal stereo
signal on the headphones and meters.