User manual
55 000 057 - B MIXY - User Manual 13
3.3. Mic/Line 1 and 2 operating mode
In the main menu, move to the 3rd line: “Mode In 1&2”. Press the “OK” button (
4
)
and move the joystick to select the desired mode for channels 1 and 2:
x
Two separate channels, independent gain setting with the faders (
1
);
x
Stereo, linked;
x
M/S, linked.
Confirm the choice by pressing the “OK” button (
4
), then leave the menu by
pressing “ESC” (
6
).
NOTE : when “Stereo”or“M/S” is selected, level control for channels 1 and 2 is
affected as follows :
x
Channel 1 fader (
1
) becomes inactive and should not be used
x
Channel 2 fader becomes the master, simultaneously controlling both
channels 1 and 2
x
The outer control on channel 2 (
2
) provides ± 5dB adjustment of channel
2 gain (relative to channel 1); the center detent is a neutral position, 0 dB
adjustment.
The control thus adjusts balance in stereo mode, or sound image width in
M/S mode.
3.4. Settings for Mic/Line inputs
In the main menu, select the fist line: “Inputs” by pressing the “OK” button (
4
).
Move the joystick to reach the various available settings for each of the three mixer
input channels.
Shortcut: it is possible to reach this sub-menu very quickly, without browsing
through the menu: from the normal meter display mode, “double-click” the
joystick. The display directly jumps to the input settings sub-menu (second page,
featuring the settings for the limiters, high-pass filters, and phase inverters).