Owner`s manual
Table Of Contents
Pandora Display Layout
Figure 3 – Pandora LED Display Layout
1. Pressing the left side of the Display will decrement the volume, when the optional volume control is installed.
2. Displays the name of the currently selected input. When a digital signal is present at any of the rear panel
inputs, the sample rate is displayed.
3. When the optional volume controls are installed, the volume level will show while it is being changed, and
remain for 3 seconds after. When a USB input is selected, C1 or C2 will be displayed for approximately 5
seconds, indicating the current position of the Class 1/Class 2 switch on the rear panel.
4. Illuminates when the Output Phase is reversed (minus).
5. Illuminates when the Pandora locks onto a digital input signal.
6. Pressing the right side of the Display will increment the volume, when the optional volume control is installed.
9