Owner`s manual

19
Appendix B Specifications
USB Audio Input Signal: 44.1, 48, 88.2, 96, 176.4, and 192 kHz 16, 20, and 24 bits.
Maximum Output Level: Balanced: 4.8 V rms without optional volume controls installed.
Single-Ended: 2.4 V rms without optional volume controls installed.
Pandora/Romulus with volume controls – the volume setting for standard 2v (SE) / 4v
(bal) output is 80.
Setting for the same output level as a non-volume control unit is 82 (2.5v se, 5v bal).
Output Impedance: 300 ohms balanced. It can drive a balanced impedance of 20K ohms or higher.
Recommended Load > 20Kohm balanced, >10Kohm Single-Ended.
Impedance:
Analog XLR Output Polarity: Pin 1 = Ground.
Pin 2 = Non-inverting (Positive).
Pin 3 = Inverting (Negative).
Frequency Response: 20Hz - 20 kHz (44.1 kHz sample rate).
20 Hz - 22 kHz (48 kHz sample rate).
20 Hz - 40 kHz (88.2 kHz sample rate).
20 Hz - 44 kHz (96 kHz sample rate).
20 Hz - 80 kHz (176.4 kHz sample rate).
20 Hz - 88 kHz (192 kHz sample rate).
Tubes: V401 E83CCS or 12AX7.
V402 6922 (6DJ8).
Power Consumption: 25W in standby, 60W locked to an S/PDIF source, 70W with a CD playing.
Trigger Output: 1/8” Jack, operates on 5VDC.
Dimensions: 17-7/8” W 4-1/4” H 18-1/8" D (45.4 x 10.8 x 46cm).
Weight: 30 Lbs. Stand alone (13.6 Kg), 37 Lbs. Boxed with accessories (16.8 Kg).
Maximum Operating Internal: 176° F (80° C).
Temperature: Room: 122° F (50° C).
Fuses: Mains: xxA SB @ 100, 117VAC xxA SB 230, 245VAC.
Power Supply: xxA SB @ 100, 117V AC xxA SB 230, 245VAC.
Specifications subject to improvement or change without notice.