Quick Start Guide

TIP: Most technical calls received are due to installers using CAT5 or alarm cable
to power the unit.
NEITHER are rated to carry enough power! ( 1.2amp peak )
Please use the following cable:
Up to 2 metres ( 6 feet ) – Use minimum 0.5mm
2
( 18 gauge )
Up to 4 metres ( 12 feet ) – Use minimum 0.75mm
2
( 16 gauge )
Up to 8 metres ( 24 feet ) – Use minimum 1.0mm
2
( 14 gauge )
POWER CABLE
KEEP POWER SUPPLY AS CLOSE AS POSSIBLE.
This product MUST be EARTHED in the following states in order to
qualify for manufacturers warranty
FL, LA, MS, AR, OK, MO, AL, IL, KY, TN, IN, KS, SC, GA, IA, TX,
OH, NC, NE, MD, WV, VA, DE
EARTHING & INGRESS
LIGHTNING PRONE AREAS MUST USE SURGE PROTECTION
FOR POWER SUPPLY!
!
!
Site Wiring
14 gauge - 24 ft MAX
Earth rod close as
possible to device!
Use 110V surge
protection!
2
Relay Connections
Connect WiFi
antenna, DC
Power &
Gate/Lock
Trigger cables
Exit
Button
Gate controller
N/C button
12v DC
(not supplied)
Magnetic
lock
4
Power
Consumption:
Standby = 96mA
Calling Out = 500mA
We recommend sealing all entry holes for prevention of insects that can
cause issues with a risk of shorting out components.
To maintain the IP55 rating please follow the sealing instructions included.
(also available online)
1
Install Preparation
Mount the antenna as high as possible and away from obstructions such as vehicles, shrubs
and trees to maximize signal strength.
Do NOT mount antenna at ground level.
Note: Do not cut or
join Antenna cable.
NEED MORE ASSISTANCE?
[phone]
SCAN THIS QR CODE TO BE BROUGHT TO OUR RESOURCES PAGE.
VIDEOS | HOW-TO GUIDES | MANUALS | QUICK START GUIDES
1
- IP Intercom with Integrated WiFi
* ALWAYS TEST THE UNIT ON SITE BEFORE INSTALLATION TO AVOID RESTOCKING FEES *
Praetorian Guard
STILL HAVING TROUBLE?
Find all of our support options such as Web Chat,
Full Manuals, Customer Helpline and more on
our website:
WWW.AESGLOBALUS.COM
Mbs
Slow Fast
I have some WiFi
signal at the gate with
my phone! If not,
STOP. Use LAN/CAT5
cable!
I have at least
1.5Mbps UPLOAD
speed. If not, STOP!
SITE SURVEY (WiFi)
The Praetorian Guard is specially designed to
transmit the video and audio stream using on
average 400 KBit/sec (peaking to 1Mbps). This
loosely translates to requiring a minimum of 1.5Mbps
UPLOAD speed on the network that the intercom is
connected to. The higher the upload speed the
better quality of image up to approx. 4Mbps.
WiFi
My WiFi Internet
Security is WPA,
WPA2, WPA3 or
better.
Mbps
To Earth Rod!
Power
3
24V DC IN (PSU
included)