Instructions

E. [e-mail]
www.aesglobalus.com
T: +1 - 321 - 900 - 4599
Batteries
The sixth option is Radar INT - this is used to
adjust the time between radar reads when in
presence mode. The default value is 60 seconds
and can be adjusted from 15 to 180 seconds.
Press SET to alter. Use Up or Down buttons to
change and SET to confirm. If no further changes
need to be made, press the UPLOAD button to
upload the new settings. Once upload is
complete, the screen will display Settings
Applied.
In order to replace the two AAA batteries, first remove the three screws on the back of the device.
Then remove the plate, and replace the two batteries. Then reinstall the plate and screws.
6.