Specifications

40-7170 Revision 2B July 6, 2012
26
C.4. Test the network connection:
• From a command prompt, reached by pressing X after a reset you can confirm
communication with assigned MultiNet receiver by issuing the command:
ping <MultiNetReceiverIPaddress> and looking for successful transmissions and
replies. Press <Enter> to stop pinging and get a summary result.
• Press reset in preparation for the next step. Similar to below should scroll on the
display of the terminal program.
Figure Q – IP-Link Serial Port Output at Startup
UCMD UIPLINK -I00001111 -S192.168.0.11 -P7070 –N101
AES UIPLink UCMD Version 0.02
Running UIPLink -v
Setting Watchdog 70 Sec
Calculating UIPLINK.exe Checksum Please Wait... Bytes Read 512Bytes Read 1024By
Done We are UIPLINK.exe with a Chksum of 0xF091, File Size 135040
Press Enter for Menu
UIPLink S0.4.4 Startup ChkSum:F091, Size:135040.
Heart Rate = 5 Seconds
IPlinkID = 00000002
Queued[0], Software Version For Server
Initializing TCP/IP Sockets
My IP Address is 192.168.0.11
sendRequest(TT)
Opening 192.168.0.101 on Port 7070
ServerTime&Date Sync. Thu Jan 06 18:10:46 2005
Radio Node Sent Me:↓
sendQueue
sendRequest(TT)
ServerTime&Date Sync. Thu Jan 06 18:10:46 2005
sendRequest(QQC)
sendRequest(QQF)
Sending Packet[0] to Server1
Unknown Reply from Server <10,00,00,00>
Sending Packet[1] to Server1
ACK Received on Packet[1] from EtherNet Server
sendQueue() done.
My UTC Time = GG46101804060005
IPLinkTime 41DD7F26, NodeTime 41DD7F28
Node Time OK.