Product Manual

No. 11850 - 05/16
ANODIZED METAL & TRIM PAINT
PRODUCT NUMBERS:
I. GENERAL DESCRIPTION
Description: Anodized Metal & Trim Paint is a fast
drying specially pigmented coating that is used for the
touch- up and installation of anodized and painted building
components. This product is available in 4 of the most
commonly used OEM colors. Durable color fastness,
good hide and coverage. This product provides long term
protection against rust, corrosion, and discoloration of
aluminum and metal materials.
Benets: This fast-drying industrial grade coating has
excellent adhesion to metal, wood and masonry surfaces.
The nish dries to the touch in 15 minutes and yields a full
cure in 72 hours. Exceptional resistance to water, sun (UV
rays), snow, and other harsh environmental conditions. It
offers easy application, great color selection, and superior
durability, while extending the life of all materials coated.
Applications: For use on window and door frames,
railings, gutters and other metal trim. Also excellent
for touch-up and installation of storefronts, fascia, and
curtain walls.
Directions: For maximum adhesion, surface must be
clean, dry and free of grease, rust, scale or any other
loose particles. Do not use on galvanized metal without
a suitable primer coat. Product should be used at
temperatures between 60° and 85°F (16° and 29°C) for
best results. Primer is recommended over bare metal.
Shake can well for at least one minute after agitator ball
begins to rattle. Shake can intermittently during use.
Hold can 8 to 10 inches from surface and press spray
head rmly. Apply with steady, even strokes; two light
coats are better than one heavy coat. Clear spray tip
after each use by turning can upside down and spraying
for 2 to 3 seconds.
Limitations: Please refer to the Safety Data Sheet for
specic information on material hazards, etc. Please
check all plastic surfaces for adhesion and compatibility
before each use.
Packaging:
Aerosol: Cans (211x604) 12 oz. net wt. (340 grams) 12.4 . oz. (366 ml)
12 cans/case 13 lbs. (5.9 kg) 0.47 CF (0.013 CM)
Product Data Sheet
Aervoe Industries, Inc.
P.O. Box 485, Gardnerville, NV 89410
[phone] Phone • [phone] Fax • [phone] Customer Service
www.aervoe.com • [e-mail]
Aerosol VOC/CARB MIR <1.40, <65% Non-Flat
1850 - CALIFORNIA BLACK BRONZE
1852 - DARK BRONZE
1857 - BRONZE
1860 - WHITE