Product Manual

No. 1156 - 09/18
REBAR GREEN EPOXY COATING
PRODUCT NUMBERS: 156 - 12 OZ. NET WT.
I. GENERAL DESCRIPTION
Description: Aervoe Rebar Green Epoxy Coating
is a high-performance, fast-drying, single system
epoxy. It is specically designed for touch-up or on
site initial coating to protect rebar and other metal/
steel surfaces.
Benets: Provides a rustproof nish to keep rust
stains from appearing in nished concrete. Adheres
to all surfaces with very good resistance to corrosion,
chemicals, and abrasion. The touching-up of
sheared ends, cuts, and other exposed areas
promptly will prevent detrimental oxidation.
Application: Use on rebar and metal/steel, or
wherever a tough, durable nish is required. Metal
supports for use in reinforcement which contact
the exposed surfaces of the concrete may also be
coated with this product or the Aervoe Galvanize
Coatings (#7007 Cold Galvanize Coating or # 7008
Brite Galvanize Coating).
Directions: Turn insert part of spray head to choose
either vertical or horizontal spray pattern. Align
spray head with black mark on valve rim to ensure
complete evacuation. Shake can vigorously for at
least 1 minute after rattle of agitator ball is heard and
intermittently thereafter. Surfaces must be dry and
free of dirt, oil, and wax. For best results product
should be used at temperatures between 60° and
80° F (16° and 27° C). Hold can 10 to 12 inches
from surface to be coated. Use steady, even strokes.
Several light coats are better than one heavy coat.
To prevent clogging of nozzle after use, turn can
upside down and spray for one to two seconds.
Limitations: Please refer to the Safety Data Sheet
for specic information on material hazards, etc.
Do not set rebar into concrete until paint has dried.
Packaging:
Aerosol: Cans (16 oz.) 12 oz. net wt. (340 grams) 14.1 . oz. (417 ml)
12 cans/case 14 lbs. (6.4 kg) 0.47 CF (0.013 CM)
Product Data Sheet
Aervoe Industries, Inc.
P.O. Box 485, Gardnerville, NV 89410
[phone] Phone • [phone] Fax • [phone] Customer Service
www.aervoe.com • [e-mail]
AEROSOL CARB VOC <65% / MIR <0.95