Product Manual

No. 1143 - 04/12
MRO CHROME GALVANIZE COATING
PRODUCT NUMBERS: 143 - 11.5 OZ. NET WT. AEROSOL
I. GENERAL DESCRIPTION
Description: Aervoe MRO Chrome Galvanize Coating
repairs hot-dip galvanizing that has been damaged by
abrasion, scratching, cutting or welding. Cosmetically
repairs both ferrous and nonferrous surfaces. An
exceptionally smooth-owing product that leaves a bright
metal coating with a reective metallic sheen. The Zinc
fuses to metal substrates.
Benets: MRO Chrome Galvanize, with 10% Zinc,
will restore galvanized surfaces to the bright look of
hot-dip. Stops rust and corrosion on any iron or steel
surface. Chrome Galvanize offers the convenience of
on-the-job application when hot-dip repair is necessary.
Does not contain lead, chromates, methylene chloride or
uorocarbon propellants.
Application: Use on pipes, heavy equipment, highway
guard rails, hand rails, welds, metal chain fences, bridges,
storage tanks, corrugated metal buildings, transformers,
television towers, signs and sign posts, railroad
equipment, construction equipment and anywhere the
bright look of hot-dipped surfaces is desired.
Directions: Whenever possible, repair should be applied
within two hours of the damage to the galvanized surface;
this prevents oxidation of the exposed areas. Surface
should be free of dirt, dust, oil, grease, old paint, heavy
mill scale, loose rust particles and any other contaminants
that could prevent proper adhesion. Severely rusted
areas should be cleaned with a wire brush to remove
loose scale prior to application of Chrome Galvanize. For
best results, use at temperatures between 60° and 80°F
(16° to 27°C). Drying may be accelerated by applying
heat. Align spray head with black mark on valve rim to
ensure complete evacuation of contents. Vigorously
shake can for 1 minute after hearing rattle of agitator ball
and intermittently (1 to 2 seconds) during use. Apply from
a distance of 8 to 12 inches. Spray in light, sweeping
strokes to avoid run and sags. Two light coats are better
than one heavy coat. Whenever you must set the aerosol
can aside for more than 2 minutes or are ready to store
the can, then invert the can and spray for two seconds to
clear dip tube, valve and tip to prevent zinc from drying
in those areas.
Limitations: Please refer to the Material Safety Data
Sheet for specic information on material hazards, etc.
Do not apply at temperatures below 40°F (4°C), or if rain
is imminent within 6 hours of application. Galvanizing
products have a limited shelf life; use them within 12
months from the date of manufacture (guarantee is for 6
months from date of purchase and 12 months from date
of manufacture). Containers should be stored in a cool
dry place.
Packaging:
Aerosol: Cans (211x604) 11.5 oz. net wt. (326 g) 16.6 . oz. (492 ml)
12 cans/case 14 lbs. (5.9 kg) 0.47 CF (0.013 CM)
Product Data Sheet
Aervoe Industries, Inc.
P.O. Box 485, Gardnerville, NV 89410
0HONEs&AXs#USTOMER3ERVICE
WWWAERVOECOMsMAILBOX AERVOECOM
CARB VOC <80% / MIR < 1.90