Product Manual

No. 1951 - 09/18
MILITARY VEHICLE & RECREATION
CAMO PAINT
PRODUCT NUMBERS:
I. GENERAL DESCRIPTION
Description: Formulated to offer both the unique visual
qualities of a true camouaging cover, and the superior
quality of an anti-corrosion paint medium. Colors offered
coincide with standard U.S. military-designated eld
colorings, and can be used as such. Digital colors match
U.S. Army (UCP or ACUPAT) and U.S. Marine Corp.
(MARPAT) digital patterns. An excellent paint for use on
vehicles and gear used in hunting, shing, civilian training
games, bird watching, etc.
Benets: This formula utilizes better pigments, solids
and resins than most other brands and formulated to
match Federal Spec. 595C color standard. Dries to a
tough, permanent, hard coat that will withstand harsh
environments and abrasion. If blended in U.S. military
color patterns, this paint offers true camouage effects
that trick the eye. Entire contents of can empties, affording
great economy. Meets the MIR requirements of the
California Air Resources Board.
Application: Use on all exposed metal or wood surfaces
as a top or nal coat. Use where an earth-toned nish is
required or desired. Ideal for military vehicle restoration
when blended to U.S. military color patterns.
Directions: Bare metal should be primed to assure
maximum adhesion. Mask and protect area that aren't
to be painted. Align spray head with black mark on valve
rim to ensure complete evacuation. Before spraying,
shake can vigorously for at least 1 minute after agitator
ball is heard and intermittently thereafter. Surfaces must
be dry and free of dust, dirt, oil, grease, wax and other
contaminants that would adversely affect paint adhesion.
For best results product should be used at temperatures
between 60° and 80°F (16° and 32°C). Hold can 8 to 12
inches from surface to be coated, and press spray head
rmly. Use steady, even strokes while spraying, making
sure to keep spraying hand in motion. Two light coats are
better than one heavy coat. Spray in well ventilated area.
Additional coats may be applied within 1 hour or after 72
hours if needed. After spraying, turn can upside down
and press spray head for approximately two seconds to
clear paint in valve.
Limitations: Please refer to the Safety Data Sheets
for specic information on material hazards, etc. As
slight batch-to-batch color variation may occur, it is
recommended that each color used in the project comes
from the same lot when applied over large areas.
Packaging:
Aerosol: Cans (16 oz.) 12 net wt. (340 g) 14.7 . oz. (435 ml)
Case (6/case): 7 lbs. (3.17 kg) 0.44 CF (0.012 CM)
Product Data Sheet
Aervoe Industries, Inc.
P.O. Box 485, Gardnerville, NV 89410
[phone] Phone • [phone] Fax • [phone] Customer Service
www.aervoe.com • [e-mail]
Aerosol CARB VOC/MIR: <60% / < 1.20 (Flat); < 65% / < 1.40 (Non-Flat)
951 - LIGHT GREEN (34151)
952 - DARK GREEN (34102)
957 - EARTH YELLOW (30257)
967 - EARTH RED (30117)
968 - FIELD DRAB (30118)
975 - WHITE (37875)
977 - SAND (30277)
979 - FOREST GREEN (34079)
987A - OLIVE DRAB (34087)
987B - OLIVE DRAB (34088)
988 - BLACK (37038)
990 - WOODLAND GREEN (34094)
992 - MARINE CORPS GREEN (34052)
997A - O.D. SEMI GLOSS (24087)
997B - O.D. SEMI GLOSS (24084)
999 - EARTH BROWN (30099)
1076 DIGITAL COYOTE (476/498)
1081 DIGITAL LIGHT COYOTE (481)
1082 DIGITAL DESERT SAND (500/503)
1084 DIGITAL FOLIAGE GREEN (502/504)