User Manual

CHANGING MOTOR ROTATION :
Except by program card , the motor rotation
of Aerostar series ESC can also be changed
by the added throttle channel as followed
steps :
1 , Connect the 3P signal cable with the Channel of
throttle.
2 , Connect the 2P signal cable with the Channel of
reverse switch .
3 , Power the ESC ,hear “Beep” from motor .
4 , Confirming the reverse switch is off .
5 , Confirming the motor can start normally and pull
the throttle to ZERO position.
6 , Turn on the reverse switch.
7 , Push throttle when the motor stop running , the
motor rotation will be reversed.
8 , If you want to change motor rotation back to
normal ,please repeat the step 5 and 6.