User Manual

RVS

Aerostar RVS SERIES SPECS

RVS

CHANGING MOTOR ROTATION :

Aerostar RVS series ESC can also change motor rotation by the extra channel as followed steps :

1 , Connect the 3P signal cable with the Channel of throttle.

2 , Connect the 2P signal cable with the Channel of reverse switch .

3 , Power the ESC ,the ESC will “Beep”.

4 , Confirming the reverse switch is off .

5 , Confirming the motor can start normally and pull the throttle stick to 0% .

6 , Turn on the reverse switch.

7 ,Push throttle stick when the motor stop running , you can see the motor rotation is reversed.

8 , If you want to change motor rotation back to normal ,please repeat the step 5 and 6.