User manual

Stuttgart professional
Aerosoft GmbH 2017
26 27
English
The right vertical line is showing the distance to the final Parking
Position. The left display is showing help for corrections. When on the
middle of the taxiway line you will see a black straight line on a
yellow background.
Step 3:
The final position will display “STOP”.
Should you not be able to see the AGNIS while rolling into the
parking position please switch the view by using one of the following
keys:
• Key „S“: virtual cockpit
• Key „-“: zoom to 0,75
• Key „SHIFT“+“BACKSPACE“: Move up
• Key „SHIFT“+“ENTER“: Move down
Ground Traffic
AESLite is used in P3D for displaying traffic on the aprons and the
airport surroundings. To avoid collision between our AESLite traffic
and the default ground traffic of P3D we recommend to switch off
the default ground traffic by setting the slider „Airport vehicle
density“ to its most left position.
Configuration of dynamic ground traffic and
static aircraft
To configure the dynamic ground traffic use the Traffic-Tool EDDSCon-
fig.exe You can find it in the Aerosoft Folder /Stuttgart. This tool can
also be used to toggle Dynamic Lighting and Static Aircraft.
Performance in P3D
Performance in P3D very much depends on the settings you‘ve
chosen. P3D has higher hardware demands than the FSX version.
Especially the various shadow settings and dynamic lighting require a
higher-end graphics card.
Therefore, using „dynamic lighting“ is only recommended when you
have a powerful graphics card. If you card is older and has less than 2
GB of memory, you should turn this option off.
The other hardware specific graphics settings depend on the graphics
card you have. However, you should make sure to have anisotropic
filtering and antialiasing selected, since otherwise the ground layout
will not be displayed correctly.