User manual

46 47
46 47
Q: I‘m using ActiveSky Atc vectors me to land VFR on runway 21. At
the same time all AI were landing and departing runway 03, the
opposite end. Why?
A: This can happen when using an external weather programs such as
ActiveSky. Pro Flight ATC reads the weather and chooses the correct
runway, but ASV6 may update the weather forcing a change of
the active runway. FS9/FSX ATC will change the active runway, but
PFE has already made its choice, hence the incursion. To avoid this,
it is necessary to use the „suppression“ options according to the
type of flight/aircraft. Using the New Route and Navigation Log will
be helpfull too.
Please see your ActiveSky manual for details and how to use these
powerful features, it is usually located (Windows XP) at:
C:\Program Files\Microsoft Games\Flight Simulator 9\Modules\
ASv6\User Guide
If one chooses not to take these extra steps in ActiveSky, then
using the default FS9/FSX real weather instead of ActiveSky will
prevent this issue from happening while using PF ATC.
Q: I changed my callsign in ProFlight, recompiled the ADV FLight File,
but I‘m still hearing my old callsign.
A: Check to see if you have a callsign set in PFE option. If you do then
you must delete it. Pilots Voice, Airline and Callsign each overrride
the same settings in ProFlight but can be useful if you always want
to use the same callsign even if using an ADV Flight File created by
another user with their embedded callsign.
Q: The approach to my destination was rubbish. I was far to high when
cleared for the approach!
A: Adjust you flight plan descent profile during compilation. Remember,
your flight will only be as good as your flight planning, just as in
the real world.