User manual

Pro Flight Emulator Deluxe
Aerosoft GmbH 2007
40 41
40 41
PF2K Commands
ProFlight Commands used in PFE
PFE Default settings require you to use the Ctrl+Shift+ key combination together
with one of the keys listed below EXCEPT for keys 0 thru 9 and the ROGER
key, which only require a single keypress. Eg. For Virtual Co-Pilot mode use
Ctrl+Shift+V but for Initial Check In you only need to use the zero key and to
Roger an ATC call you only need to use the ‚\‘ key
Facility Key Pilot Command/Message Game Commander
- ALL - E Declare an Emergency „Mayday, Mayday, Mayday“
- ALL - = Say Again/Repeat „Say Again“
- ALL - \ Roger/Readback „Roger“
- ALL - D Toggle AI ground traffic
detection on/off (default
is ON)
N/A
- ALL - V Virtual Co-Pilot Mode - 4
Modes
OFF, COMM, COMM PLUS,
P.I.C., P.I.C. PLUS
N/A
- ALL - W Warp Mode - Warp to
Waypoint, User Wind/
Override Selection
N/A
EMERG Y Positve answer (Yes) „Yes“
EMERG N Negative answer (No) „No“
Clearance 0 Initial Checkin, request
CLEARANCE
„Checking in“
Ground 0 Initial Checkin, ready to TAXI
to RUNWAY
„Checking in“
Ground 1 Taxi To Runway Guide
Ground 5 Clear of the runway, request
TAXI to TERMINAL
„Request Taxi to Parking“
Ground 6 Request Radio Check „Request Radio Check“
Ground 7 Request Altimeter Setting „Request Altimeter Setting“